Canton Products

Canton offer a wide range of accessories for water and oil systems.

Header Tank

This lightweight aluminum header fill tank has a 1/2" N.P.T. bottom fitting and a 3/8" N.P.T. side fitting.  1-1/4 quart, has built in mounting brackets, accepts standard radiator caps. Recommended for applications where the top of the radiator is lower than the top of the engine.

Coolant Recovery

This versatile 2or4 Qt. aluminum tank features a vented fill cap, built in mounting tabs, and a clear tube sight gauge. Bottom and side ports allow this tank to be used as a recovery or an overflow catch tank. Includes two 5/16” barbed fittings (one straight, one 90 deg.), one socket hex plug, and one petcock drain fitting.

Dimensions: 5-1/2" H x 4-1/2" W x 3" D 2qt

Dimensions: 10.25" H x 8.75" W x 4" D 4qt

Breather Can

Breather Tank can be used to vent a dry sump tank, rear end, or any other application where a breather catch tank is required.Breather Tank can be used to vent a dry sump tank, rear end, or any other application where a breather catch tank is required. This tank has a 3/8" N.P.T. or -12 male side inlet, 1/4" N.P.T. bottom outlet with a petcock, accepts a standard 1-3/8" breather (included) on the top, mounting clamp and a weld bracket which allows for panel or roll bar mount.

Dimensions: 11" overall with 3-1/4" dia. This tank has a 3/8" N.P.T. or -12 male side inlet, 1/4" N.P.T. bottom outlet with a petcock, accepts a standard 1-3/8" breather (included) on the top, mounting clamp and a weld bracket which allows for panel or roll bar mount.

Oil Thermostat

Oil Cooler Thermostat helps your engine oil come up to temperature quickly and holds it at the right temperature. Cold oil does not flow and does not lubricate correctly, moving cold oil robs power. Designed to bypass the cooler until the oil reaches 215 degrees. These housings are machined from a 3-1/4" square aluminum extrusion, 6" tall with a blue anodized finish. Comes with a stainless steel mounting clamp. -12 port fittings.